====== DTC ======

Example for a diagnostic trouble code (DTC).

DTC P0505: Fault in the idle charge control system

CONDITION FOR FAULT DETECTION
	
- The PCM cannot control the idle speed during the self-test.
Diagnostic information
- The malfunction indicator light does not come on.
- Therefore, no PRESET CODE is available.
- Frame data is not available.
- The malfunction code is not stored in the PCM memory.

POSSIBLE CAUSE
	
- Drive-by-wire control defective
- A/C cut-off control defective
- Generator control system defective
- Air intake line blocked

    - Air filter element clogged 
    - Throttle body clogged 

- Insufficient compression

    - Engine oil fault 
    - Oil pressure dropped 
    - Malfunction of oil metering pump 
    - Malfunction of oil metering pump control 
    - Engine malfunction 

- Fuel pressure malfunction
- PCM defective